TCP/IP SETTING MANUAL

TCP/IP SETTING MANUAL 

In this part, you should have correctly calculated the IP address for the Online Learning System Server. As a consequence, you'll need to provide instructions for configuring the server's IP address. You may use any operating system to demonstrate this task. To support the explanation, a screenshot and a reasonable explanation should be utilized. 

 Configuring TCP/IP on Windows 11 

 Steps to do TCP/IP Configuration :

 1. In Search engine, search for Control Panel.Open it.

2.After that,choose Network and Internet.

3.Choose Network and Sharing Center.

4.After that, choose Change adapter settings button on the left side of the window.

5.To open the Properties, right-click on Wifi, choose properties. Then double-click Internet Protocol Version 4(TCP/IPv4).

6.After that, choose use the following IP address. Enter the IP address, Subnet mask, Default gateway, Preferred DNS server and Alternate DNS server that you computed in the previous step. After that, checked the validate settings upon exit checkbox then click OK.

7. Lastly, the troubleshooting page will appear, if no problem detected then it can be use.